Additional Information

Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Majacraft FUSION ENGINE Drum Carder

26.00 LBS
Usually ships within 24 hours, standard business days
Free Shipping

Product Description

Majacraft FUSION ENGINE Drum Carder


This is the Fusion Engine, Majacraft's amazing drum carder. We designed this machine to perform exceptionally, and to reduce or eliminate the common carding issues experienced with other drum carders. The Fusion Engine has a higher and more efficient carding ratio than most carders, so blends fibres more thoroughly with fewer passes. With no exposed gears or belts, and the unique drum design, fibres do not get where they shouldn't and cleaning of the carder is minimised. Removal of the interchangeable drums makes that rare cleaning simple and easy.

This is the best machine we could make and look forward to sharing it with you!

The Fusion Engine left view

Left view

The Fusion Engine right view

Right view

Here are some of the features of the Fusion Enginer carder...

Magic drums

The Fusion Engine drums use a unique new design that offers several benefits, the most obvious being the prominent edges that keep the fibre on the drum, so there is no clogging or tangling of material around the axles. The special shaping of the edging actually helps to draw the fibres onto the drum, almost to the point of appearing as though it is 'sucking' the fibre in. This in turn significantly reduces the maintenance and cleaning required.

Magic drums

The magic drums on the Fusion Engine keeping the batt on the drum

Switching Drums

A major feature of the Fusion Engine is the ability to change drums. There is no need to purchase multiple carders to work with different kinds of fibres as we offer drums with different carding cloth densities. Your carding becomes considerably cheaper and your single machine far more versatile. There are just three grub screws holding the main drum in place, and it is possible to swap the interchangeable drums in a couple of minutes!

In addition to the standard 72tpi cloth, we are offering 128tpi cloth drums by special order.

Changeable drums

Fusion Engine drums can be switched easily for different carding tasks


The fusion engine has a gearbox - with real gears! This was chosen as it could offer multiple benefits. Firstly it makes the mechanism for converting the ratios between the main drum and licker-in much more compact, small enough to be embedded into the side of the carder. This consequently will keep your carder cleaner as the gears are hidden away and will not get clogged with fibre and other debris.

A gearbox also permits running a much greater ratio in a compact space. Typically carders have between 3:1 and 4:1 gearing ratios. The Fusion Engine has a ratio of 8:1 which will produce a more evenly blended batt.

Carder gearbox detail

Detail of the Fusion Engine gearbox

Adjustable Feedtray

The feed tray position is different to most other carders. Our experiments demonstrated that the more time the fibre spent on the licker-in, the more effectively the carding process worked. This is why the feed tray is positioned so high relative to the licker-in drum.

We also made the feed tray adjustable. Underneath the tray is an easy-grip wooden nut that lets you position the feed tray close or far from the licker-in. The ability to adjust the tray lets you card anything from washed fleece to combed tops.

Adjustable feedtray

The high mounted feedtray can be moved backward and forward

Easy to Adjust

The licker-in drum is mounted on the two actuators which can be very simply adjusted by unscrewing the locking JCB bolts - the gearbox cover does not even need to be removed for this. What is a tricky job on other carders is elementary on the Fusion Engine.

Easily adjustable licker-in

The licker-in position can be adjusted quickly and easily

Folding Handle

We have used a folding handle with the Fusion Engine. This allows the carder to fit into a more compact space but more importantly, no more whacking your hips into the handle as you walk past the table! The handle length is short enough that you can card in the centre of the table as well, it does not have to overhang the edge.

Folding handle

The handle folds conveniently out of the way

Great for Lefties and Righties

We have designed the Fusion Engine so that it can be used in left or right handed configuration. The axle on the main drum has been specially drilled to allow it to be inserted on either side of the carder. By unscrewing three grub screws you can slip the handle and axle and then then put it in from the other side.

Packer Brush

We have added a brush to the Fusion Engine so that more fibre can be packed on to your drums. Our design differs in that the brush is positioned near the back of the main drum so as much of the drum is exposed as possible. This makes it easier to remove the batt after carding. It also leaves a clearer space to work if you wish to lay fibre elements directly on to the main drum or diz from the drum.

The brush is secured in place using a ratchet mechanism so once you set the pressure of the brush, it will not slide out of place which can happen with brushes held by nuts and bolts. It is also easier to position by simply clicking the gears on the ratchet rather than having to tighten nuts as firmly as possible - only to have them move when you don't want it.

Rachet controlled packer brush

The rear mounted packer brush with a rachet to set position

Cleaner Brush

The cleaner brush is super lightweight. We have made our own ergonomic aluminium handles that put your hand directly over your working area for less wrist strain and more control. It has a thin curved bamboo laminate mounting plate that is both light and very strong . The carding cloth is finished with plastic caps that make the cleaner brush have clean and elegant lines with no cloth ends cloth showing.

The working area of the cloth is 95mm x 55mm (3.75" x 2") and uses 72TPI cloth.

Cleaner brush

The cleaner brush

Gentle Picker

The picker for this brush does not have a sharp point so you will not have the concern of damaging your cloth when removing the batts from the drum.

Custom made gentle picker

Custom made picker that is easy to use and gentle on the cloth

Details and Specifications:

The Fusion Engine carder comes with:

  • Fusion Engine carder
  • Picker tool
  • Two bench clamps
  • Cleaning brush
  • Allen T wrench - 3mm
  • Allen T wrench - 4mm

The Fusion Engine specifications:

  • Length-width-height: 450mm (17.7") x 340mm (13.4") x 270mm (10.6")
  • Weight: 8.25kg (18.2lb)
  • Main drum diameter: 187mm (7.36")
  • Cloth width: 210mm (8.2")
  • Cloth pitch: 72tpi standard (128tpi available - special order)
  • Batt size (approximate): 210mm x 570mm (8.2" x 22.4")
Fusion Carders are drop shipped directly from Majacraft.

Product Videos

Fusion Engine carder - magic drums 01:53

The magic drums on Majacraft's Fusion Engine drum carder 'suck' the fibre on to the drum. This unique feature minimises the cleaning required while letting the user create thick, even batts right out to the edge of the drum

  • Fusion Engine ...
    The magic drums on Majacraft's Fusion Engine drum carder 'suck...
  • Fusion Engine ...
    See how simple it is to remove the drum from the Majacraft Fus...
  • Fusion Engine ...
    Some views of the amazing integrated gearbox in the Majacraft ...
  • Fusion Engine ...
    Here is a detailed tutorial on how to adjust the licker-in dru...
  • Fusion Engine ...
    A quick demonstration of how to use the innovative ratcheted p...
  • Fusion Engine ...
    The Majacraft Fusion Engine carder can be used in right or lef...
  • Fusion Engine ...
    The Fusion Engine drum carder has an easily movable feed tray ...
  • Drum Carding
    WoolWench demonstrates two different ways of carding a batt, s...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category